Safe and Accessible Bathing Solutions Rotating Header Image

Remodeling

Catch the Best Bath Systems Channel on YouTube

In case you haven’t tuned in yet, the Best Bath Systems YouTube channel is up and running. We have a wide range of videos that cover the full line of safe and accessible showers and walk-in tubs for seniors and those with limited mobility. Watch bathtub and shower installation demonstrations, customer testimonials and informative pieces on independent living and aging in place for families.

You can find our ever-growing collection of videos at: http://www.youtube.com/user/BestBathUSA

Community Block Grant Funds Wyoming Low Income Retirement Home Remodel

Rocky Mountain Manor, an assisted living facility for seniors in Powell, Wyoming, needed a hand. They required funding for a major remodeling project, so they approached the Powell City Council to sponsor a community block grant. Another organization focused on affordable housing, Mountain Spirit Habitat for Humanity, was also in dire need of funds – but there was only enough for one. While Rocky Mountain received the funds, another grant was sought out and, in the end, both organizations got the money they needed to continue to provide quality, affordable living options for area residents in need.

You can read an article about the projects at the Powell Tribune website.

Best Bath Systems is pleased to have been chosen as the supplier of bathroom shower units for the Rocky Mountain Manor.  Marla Pierson, Manager of the Manor chose Best Bath showers for their structural integrity, new construction look and visual appeal.

“We didn’t have to build in supports or backing, and the showers provide a system that gives us a long-term fix for bathing,” Pierson explained. Additionally the units included a custom built shower base to align with the drains, saving additional on-site fabrication time and costs.  She also commented on the ease of installation, saying “installation, including removal of the existing tub took a day to a day and a half to complete.  Two contractors were used in our project of nearly 50 installs and they completed them all well under deadline.”

There’s No Place Like Home

I thought I would share an insightful presentation put together by Tubz in Sacramento.  It’s a presentation they have given to community groups to inform them on the importance of bathroom safety and accessibility.

There’s No Place Like Home: Re-Thinking Everything

Bathrooms from the Beginning

Before World War II, most homes were built one or two at a time, with each home being built to meet the unique needs of the family it was intended for. After the war, builders met the huge demand for housing by rolling out large subdivisions of standardized homes. The builders wanted to build rooms that met the ergonomic needs of the typical adult.

To do this, they needed data on things like how high sinks should be, how wide doors should be, and how high steps should be. With hundreds of such decisions to make, the builders were thrilled to discover that the Defense Department had all this data: The military had been gathering such data for years in order to design everything from tanks to battleships. The builders got the military data, and America got standardized housing. Soon the standards were set in stone as building codes were written to enforce the standards. There was only one problem with this whole evolution: the military’s data was all based on the physical needs and capacities of physically fit 18-year-old males!

So today we have a huge array of housing that is not well designed for large segments of the population. Seniors and children are the least well served by current housing. Today’s homes simply do not have the features and conveniences appropriate for safe enjoyment by a diverse population.

Your ability to function well in your home is one of the most important factors in determining how long you can maintain comfortable independence. Adapting your home to meet the needs of an aging population makes sense. Not only will it enhance market value, but a well-adapted home will make many day-to-day living tasks both easier and safer. Additionally, appropriate adaptations will often prevent the most common accidents that may ultimately rob you of your independence. If you don’t take responsibility for adapting your home, who will?

Start Early

Preparing your home for your senior years is a long-term project that should be started as early as possible — preferably well before middle age. Why so early? Over the years, you are constantly making repairs, renovations and improvements to your home. If each time you make a change you look at it as an opportunity to help ensure your independence later in life, you can make appropriate adaptations intelligently. Even if there’s a chance you’ll move, it makes sense to adapt the home as you go along. Seniors are a large and rapidly growing part of the population, and meeting their needs is an increasingly important factor in home sales.

In most cases, adaptations made in the natural course of maintaining and improving your home will require little (if any) extra cost. This is because most adaptations are simply a matter of appropriate design. For example, it costs no more to build a wide hallway than it does to build a narrow one, yet the wide one will make life much easier for anyone dealing with a wheel chair or walker. If you’re going to remodel anyway, just be smart about how you lay things out.

Another great advantage of making these changes as you go along is that you can design the solution right into the project. For example, if you get appropriate door handles now (levered types are best), you won’t need some add-on gizmo later to help you turn doorknobs. How many wheel chair ramps have you seen that stick out like sore thumbs? For many homes, better planning and design would make the ramp unnecessary.

Take Responsibility/Gain Control

By taking responsibility for making home adaptations over time, you keep control over the process. You make the decisions. All too often, when you procrastinate, nothing gets done until there is a crisis or immediate need. Then another family member, a discharge planner or a social worker is probably going to be making the decisions for you.

Ultimately, the price of putting off adaptations can be high. Leaving the home unchanged greatly increases the odds that you’ll experience a fall or accident at home. Besides the pain, stress, and costs of such a mishap, there’s the real possibility that you won’t be able to continue to live independently in your home. If you wait until some disability develops before making any changes, you may find that the same changes that would have cost very little if done with routine improvements will now cost a small fortune.

Typically, adaptations done at the last minute look like they are designed by a committee. In part that’s because in many cases last minute changes are designed by a committee! By the time all the arguing and compromising are done, your house may not reflect your tastes or priorities at all. So take control of your future and begin to make adaptations now.

What If You’re the Caregiver?

Independence. For seniors and just about everyone else, it is a central element of a fulfilling lifestyle. There is no greater symbol of independence than owning and living in one’s own home. More and more experts are discovering that extending the time that seniors can manage in their own homes is important in terms of both mental and physical health. From a societal stand point, institutions are a cumbersome and extremely expensive option. Helping people manage independently at home makes sense for everyone.

Because the arguments for sustained safe living at home are so compelling, caregivers can be very pushy about making changes. Concerned caregivers often get preoccupied with the risks associated with independent living. This preoccupation can put caregivers in the position of trying to impose a long list of home adaptations in a misguided effort to make the home accident proof. When imposing solutions, however, caregivers lose sight of the key element in the equation: independence.

Most people are such fierce protectors of their independence that they will reject out-of-hand a plan of action that usurps their independence – even if the plan of action has many merits. In other words, any approach that tramples someone’s sense of independence is doomed. Don’t fall into this trap.

Who’s In the Driver’s Seat?

Understanding the need for independence brings us to the most important element of adapting a home to better suit the needs and desires of seniors: the seniors whose “needs” are to be met must be in the driver’s seat. It is their home; it is their turf. Once this issue of whose home it is has been resolved, most people become pretty open to making changes. If the adaptations are being forced from the outside, most folks will resist heartily.

There is a flip side to the independence equation. Seniors who want to prevent meddling by concerned family, friends, and social workers should take the initiative in making needed changes. They’ll end up with a safer home, an easier daily routine, and a well-earned, renewed sense of independence.

Paying for Adaptations

Many folks argue that adaptations, while a good idea, aren’t affordable. The problem with this logic is that it ignores what it costs to live in a nice nursing or retirement facility. The amount you think you saved by avoiding needed improvements are likely to be dwarfed by the costs of moving into an institution. Making changes to your home can extend your independence by years. That’s years of independence and years of avoiding the costs of retirement housing. The numbers aren’t even close. Making the adaptations makes good financial sense.

So before you dismiss such changes as too expensive, have another look. Even if you don’t have the cash, there is a strong likelihood that the equity you hold in your home can help you pay for improvements. Talk to a lender and you may be surprised at how easy it is to finance the changes you need. Odds are that you’ll have to tap into that equity in a much bigger way if you have to move.

Home Adaptations to Focus on

There are four types of adaptations that you should focus on:

1.     Mobility into and through your home

2.     Handholds

3.     Hand-friendly handles and control knobs

4.     Other safety features

Mobility. Mobility into and through your home. There is a very high chance that you, or someone you live with, will eventually use a wheelchair for periods of time. At the very least, as you get older you will have more difficulty getting around and steps will become a significant barrier.

Even if you never need to use a wheelchair, you may wish to make better use of grocery bag carts, strollers, wheeled trash cans, wheeled luggage, and a variety of other conveniences. All these devices are stopped cold by steps and, like wheelchairs, are difficult to maneuver in tight spaces once inside the home. So there are two things to aim for: eliminating steps and creating maneuvering room.

Accessible Entry. One of the simplest ways to make your home easier to live in is to make at least one entrance to the main living level accessible without going up or down steps. This may mean rerouting or regrading the front walk and porch. If you do this rerouting or regrading when you are having the walk replaced anyway, there will be little (if any) additional cost. Inside the home, there usually aren’t many steps that can be easily eliminated. If you add an addition, just make sure you don’t make it necessary to use steps to get into it!

Single Level Living. Another approach that works well is to prepare for single-level living. As you make changes over the years, seek to give yourself the option of living entirely on one level, even if only temporarily. Make sure you have a full bath, a kitchen, and a bedroom all on one level. If you have no bedroom on the kitchen level, consider installing pocket doors in your living room or dining room. Pocket doors are doors that hide away in the wall when not in use. When closed, they can convert a room into a private, temporary bedroom. Having laundry facilities on the same level is a big plus.

Interior Maneuverability. Inside your home, maneuverability is most critical in the kitchen and the bathroom. Use floor surfaces that don’t become slippery when wet. Open up spaces and doorways. Whenever possible, design doorways that are 36 inches wide and eliminate thresholds over one-inch high. Make sure the thresholds you do use have beveled (sloped) edges. (Thresholds are the wooden, metal, or stone bumps on the floor of outside doorways and bathroom doorways.) While you don’t give any thought to thresholds when you are fully mobile, they represent real obstacles to wheelchairs and other wheeled devices. These changes will not only make your home wheelchair friendly but will also give it a more open, spacious feel.

Handholds. The next issue to focus on is handholds. While it seems silly, keep in mind that many serious falls are caused by inadequate railings and grips. This is especially true in the bathroom. Ensure that you’ve got plenty of support around the toilet and the tub or shower. If you don’t want to install grab bars now, but are doing any sort of remodeling, ask your contractor to include “blocking” throughout the bathroom. Blocking is just wood added behind the drywall or tile that provides a solid material to which grab bars can later be fastened. Done along with remodeling, the costs are minimal, but if you have to add blocking later, it can be very expensive.

The Stairs. Check the stairs around your home. Does every step in the house have an adequate railing? Many original stair banisters are good for little more than show. An adult’s body weight can easily tear them from the wall. Many original railings don’t extend far enough at the top or bottom of the steps. Can someone get a good grip before committing to the first step? These banisters need to be checked and should be reinforced or extended if necessary. Hand-friendly handles and control knobs. Getting around in your home doesn’t do you much good if you can’t open the doors or use the appliances! A room-by-room review of handles and knobs will yield a substantial list of inadequacies. We’ve already discussed using levered type doorknobs.

Window Handles. You’ll also want hand-friendly window handles and controls. Bathroom faucets are another problem area. Most people find that a single lever that controls both hot and cold water is the easiest and safest to use.

The Kitchen. The kitchen may be the most critical of all for checking hand-friendly handles and controls. Can you reach the stove control knobs without risking a burn to your arm? Will they be easy to turn as your hands become less nimble? How about the sink faucet? What about all those cabinet and drawer handles?

Other Safety Issues. Finally, there are some other issues to consider. The odds are that your neighborhood will become less safe over time. Have you taken adequate home security measures?

Lighting. Do you have bright, automatic, external lights? What about internal lighting? As you get older, it takes more light to see the same things. Reading lights need to be brighter. Well-lit stairs become ever more important.

Intercom. An intercom can provide added safety and a convenient way to communicate with others when it’s difficult to get around.

Burns. Burns are one of the most common injuries for older folks. We already talked about the stove controls. Often, you can eliminate the use of the stove for heating water, which is its most common use. There are hot water dispensers that are set up like another faucet at your sink and eliminate the risks associated with heavy pots, a hot stove, and slopped scalding water.

Scalding water also causes many injuries in the bathroom. It is not at all unusual for someone to fall in the shower or tub, hitting the faucet on the way. If the water temperature is suddenly increased and you can’t get to the controls, even moderately hot water will cause burns if allowed to flow for several minutes. This is another hazard that can be eliminated.

Anti Scald. A number of manufacturers make faucets that have a built-in scald-prevention mechanism which automatically cuts off water flow if the temperature exceeds a preset maximum. Such devices can also eliminate the scalding that can occur in the shower when someone else is flushing a toilet or otherwise lowering the cold water pressure. A simple, low cost way to reduce burns from hot water is to lower the temperature setting on your hot water heater. Many heaters are set at a scalding 140 degrees, when a much safer 120 degrees is adequate.

Maintaining independence takes more than words and will: it takes actions. This guide should help you get started in your quest to adapt your home to maximize the years you can operate independently in your own space.

NAHB: Remodeling Market Poised for Recovery

Encouraging numbers are being reported by the National Association of Home Builders’ Remodeling Market Index.  For the first quarter of 2010, the index rose to 47.9, up from 33.9 in the previous quarter and reflects the highest level since the first quarter of 2006.

While a number below 50 indicates that remodelers see overall market conditions as poor, this gain suggests that the industry is seeing growth after several years of decline.  Further data supports this potential trend:

  • Calls for bids rose from 37.5 to 56.3
  • Appointments for proposals up from 34.4 to 59.2
  • Work committed for the next three months rose from 21.9 to 33.0
  • Backlog of remodeling jobs at 47.2, up from 31.9

Renovating and Lead Abatement Safety Issues

Bob St. Clair of First Service Industries and Luxury Bath & Kitchen Design Studio in Loves Park, IL was kind enough to pass this item along. As of April 22, 2010, the EPA requires that renovation, repair and painting contractors be certified in lead safety practices for work done in pre-1978 homes, schools and child care facilities that have lead based paint. The rule does not apply to minor maintenance or repair activities where less than six square feet of lead-based paint is disturbed in a room or where less than 20 square feet of lead-based paint is disturbed on the exterior.

Contractors have to become certified in lead safety practice (here is the application) and supply owners with this pamphlet: Renovate Right: Important Lead Hazard Information for Families, Child Care Providers, and Schools (PDF). Additionally, renovators should:

  • Find a training provider that has been accredited by EPA to provide training for renovators under EPA’s Renovation, Repair, and Painting (RRP) Program
  • Provide a copy of your EPA or state lead training certificate to your client
  • Tell your client what lead-safe methods you will use to perform the job
  • Learn the lead laws that apply to you regarding certification and lead-safe work practices beginning in April 2010
  • Ask your client to share the results of any previously conducted lead tests
  • Provide your client with references from at least three recent jobs involving homes built before 1978
  • Keep records to demonstrate that you and your workers have been trained in lead-safe work practices and that you followed lead-safe work practices on the job
  • Read about how to comply with EPA’s rule in the EPA Small Entity Compliance Guide to Renovate Right
  • Read about how to use lead-safe work practices in EPA’s Steps to Lead Safe Renovation, Repair and Painting

You can learn all about the new rules and regulations at www.epa.gov.

Fresno Business Owners See Increase in ADA Lawsuits

Business owners in Fresno, California have been hit by string of lawsuits that allege handicapped and disabled patrons haven’t been appropriately accommodated under the Americans with Disabilities Act.  Complaints range from lack of handicapped parking spaces to sharp objects in bathrooms. While some business owners are feeling like the lawyers are trying to make a buck, advocates for the ADA say it’s a wakeup call for businesses to address compliance with the 20 year old law.

To help deal with the legal and renovation costs in this down economy, city officials are providing grant money and redevelopment funds, running workshops, and paying for certified access specialists to offer advice on how to approach compliance improvement projects.

Click here to read the full article.

Here are a few points on building and making renovations that are applicable to businesses provided by the official government site www.ada.gov.

Q. What does the ADA require in new construction?

A. The ADA requires that all new construction of places of public accommodation, as well as of “commercial facilities” such as office buildings, be accessible. Elevators are generally not required in facilities under three stories or with fewer than 3,000 square feet per floor, unless the building is a shopping center or mall; the professional office of a health care provider; a terminal, depot, or other public transit station; or an airport passenger terminal.

Q. What are examples of the types of modifications that would be “readily achievable” (easily accomplishable and able to be carried out without much difficulty or expense) in most cases?

A. Examples include the simple ramping of a few steps, the installation of grab bars where only routine reinforcement of the wall is required, the lowering of telephones, and similar modest adjustments.

Q. What are the ADA requirements for altering facilities?

A. All alterations that could affect the usability of a facility must be made in an accessible manner to the maximum extent feasible. For example, if during renovations a doorway is being relocated, the new doorway must be wide enough to meet the new construction standard for accessibility. When alterations are made to a primary function area, such as the lobby of a bank or the dining area of a cafeteria, an accessible path of travel to the altered area must also be provided. The bathrooms, telephones, and drinking fountains serving that area must also be made accessible. These additional accessibility alterations are only required to the extent that the added accessibility costs do not exceed 20% of the cost of the original alteration.

Q. Are businesses entitled to any tax benefit to help pay for the cost of compliance?

A. As amended in 1990, the Internal Revenue Code allows a deduction of up to $15,000 per year for expenses associated with the removal of qualified architectural and transportation barriers. The 1990 amendment also permits eligible small businesses to receive a tax credit for certain costs of compliance with the ADA. An eligible small business is one whose gross receipts do not exceed $1,000,000 or whose workforce does not consist of more than 30 full-time workers. Qualifying businesses may claim a credit of up to 50 percent of eligible access expenditures that exceed $250 but do not exceed $10,250. Examples of eligible access expenditures include the necessary and reasonable costs of removing architectural, physical, communications, and transportation barriers; providing readers, interpreters, and other auxiliary aids; and acquiring or modifying equipment or devices.

Q. Does the ADA permit an individual with a disability to sue a business when that individual believes that discrimination is about to occur, or must the individual wait for the discrimination to occur?

A. The ADA public accommodations provisions permit an individual to allege discrimination based on a reasonable belief that discrimination is about to occur. This provision, for example, allows a person who uses a wheelchair to challenge the planned construction of a new place of public accommodation, such as a shopping mall, that would not be accessible to individuals who use wheelchairs. The resolution of such challenges prior to the construction of an inaccessible facility would enable any necessary remedial measures to be incorporated in the building at the planning stage, when such changes would be relatively inexpensive.

Become a Certified Home Modification Assessment Professional

Making a home safe and accessible takes planning. The Fall Prevention Center of Excellence offers an online program for contractors and remodelers to gain an Executive Certificate in Home Modification. Coursework includes developing safety checklists, individualizing home modification projects, funding options, community outreach, and ethical considerations.

To learn more and register, click here.

The State of Remodeling in Today’s Economy

In 2009, the Harvard Joint Center for Remodeling Studies released a study titled “The Remodeling Market in Transition”. In it they found, to no one’s surprise, the downturn of the housing market has had an impact on home improvement spending.

Existing home sales were down 30% in the 3rd quarter of 2008 from the most recent peak. Since a large portion of remodeling projects come with the purchase of existing homes, as the buyers come in and desire to make changes, it spells fewer opportunities. Throw in less equity, falling housing prices and increases in foreclosures and there is less incentive to make improvements to boost the home’s overall resale value.

But the study determined some interesting areas of the market that will show growth heading into the next decade. These include homes purchased by recent immigrants, rental properties that felt neglect during the home buying boom, foreclosed homes that qualify for federal housing redevelopment funds, and the increasing demand from consumers for quality, durable, sustainable and safe housing products.

It’s a great read. Click here to view the full report.

New Study Reveals Installation Costs Among Leading Types of Shower Surrounds

An independent study conducted by RSMeans Company has determined that the installation of Best Bath Systems one-piece roll-in fiberglass shower surrounds takes significantly less time and money than ceramic tile and fiberglass mud set shower surrounds.

RSMeans, a division of Reed Construction Data, is a leading supplier of construction cost and materials pricing information. Developers, architects, engineers and contractors in North America rely on their products and services to project and control the cost of both new construction and renovation projects.

The 2009 study measured the average installation time and labor costs for seven Best Bath Systems one-piece shower surrounds in a continuing care retirement community in Massachusetts. Labor was based on the average wages in 30 major U.S. cities. They determined benchmark average costs of installation at:

  • Best Bath Systems one-piece roll-in shower surround: $126
  • Mud set fiberglass surround: $178
  • Ceramic tile surround: $685

Best Bath one-piece roll-in commercial shower surrounds are pre-leveled and require no additional mud set material. Designed for durability with a wood core, fiberglass and a gelcoat surface, they are ideally suited for the bathing needs of hospitals, independent living communities, university dormitories and condominiums where safety and accessibility are of the utmost concern.

Installing ceramic tile surrounds entails hanging cement backer boards, mixing and applying thin set mortar, laying tile, adding reinforced plywood bracing (hidden from view) for safety bars, grouting and grout sealing. Best Bath one-piece surrounds merely require adhesive to secure the unit. Comparing the two by installation time, ceramic surround installation averages 11.75 hours vs. 1.72 hours for the Best Bath surround.

Conventional fiberglass shower assemblies have a cavity that must be filled with a mud set to bond the unit into place. Installation time on average is 2.44 hours or 30% longer than Best Bath, plus the additional material and mixing cost.

Findings of the study revealed that the Best Bath surround installation resulted in a cleaner job site, reduced training costs and easier installation of safe bathing accessories such as shower grab bars and seats at a later date.

Read the complete report by clicking here.

Case Study: Custom Shower Solutions Solve Asbestos Abatement Issues in Senior Living Facility

When New York-based LAN Associates Architects and New Jersey-based Construction Technology Corporation discovered asbestos embedded in the 350 bathrooms of the 30 year old Asbury Tower,  a 26-story senior living high-rise in Asbury Park, New Jersey,  their remodel project was in danger of grinding to a halt.

After thorough evaluation of the Asbury Tower, traditional asbestos abatement options were considered.  “We started looking at encapsulating the walls rather than bringing in an asbestos contractor to demo the bathrooms. We became aware of Best Bath Systems and their willingness to produce custom work and decided to call,” said project architect Vlad Potiyevsky, of LAN Architects.

Best Bath Systems was contracted to design, manufacture and deliver a custom accessible bath solution to effectively remodel, cover and seal the tower’s 350 bathrooms. It allowed architects and construction project managers to avoid costly asbestos removal, install a beautiful bathroom and put the remodel back on track.

The challenge for Best Bath was to design custom built pieces to fit each bathroom. Though they appeared as identical footprints on the construction floor plans, the 350 bathrooms were originally built in eight different design layouts, each with varied dimensions.

“We needed to be able to cover up the wainscot and around the door areas of the bathroom without disturbing the sheet rock and also take out the old bathtubs and put in a more accessible shower,” Cal Osborn of Best Bath explained. “We had to design for these different rooms a multi-piece, universal system; you can’t just bring in a one piece unit. So the floor needed to be separate from the shower pan and then all the wainscot and shower sections had to be custom built to fit together once they arrived at the job site.”

Best Bath manufactured over 7,000 shower surround system composite fiberglass pieces for the Asbury Tower remodel. Finish wall materials include gel coat surfaced fiberglass with encapsulated plywood. This standard Best Bath wall feature allows placement of accessories without additional modification. Because a harder surface was desired for the bathroom floor, a state of the art, sprayable solid surface was selected for the floors, giving the look and feel of granite and enabling the surface to withstand shoe traffic.

Best Bath helped construction managers meet critical construction timelines by offering unusually quick turnaround. Just six weeks after being contacted by LAN Associates, Best Bath manufactured and shipped a complete bathroom system for test fitting and resident feedback.  “It’s not your typical construction vendor that is able to supply things so fast, especially when it’s made from scratch,” said Scott Harris, senior project manager at Construction Technology Corporation.

Best Bath Systems attributes the quick turnaround time to the very nature of the universal bath system. The interchangeability of the shower wall and floor components reduces tooling time dramatically. Osborn says Best Bath’s rapid production can also be credited to Best Bath’s custom-oriented production system, which is unique to the industry.

“Out of necessity, most manufacturers are production-oriented; Best Bath is a solution-oriented company. We’re set up to do custom work and we welcome creative custom ideas, we are able to adapt to custom challenges,” said Osborn.

This partnership kept the Asbury Tower remodel on budget and enabled them to meet their spring, 2009 completion date.